Bike Decals
Aufkleber für dein Fahrrad, Laptop oder Helm – ganz nach Wunsch.
Anleitung zum Aufbringen des Aufklebers:
Dein Aufkleber besteht aus drei Schichten:
Eine durchsichtige Kunststoff-Deckschicht
Der eigentliche Aufkleber
Eine Papierträgerfolie auf der Rückseite, die den Kleber schützt
Der Klebstoff ist sehr stark – einmal angebracht, lässt sich der Aufkleber nicht mehr ohne Weiteres entfernen.
So bringst du den Aufkleber an:
Reinige die gewünschte Stelle mit Seifenwasser und trockne sie anschließend mit einem Handtuch.
Ziehe vorsichtig die undurchsichtige Schicht ab.
Platziere den Aufkleber an der gewünschten Position.
Drücke den Aufkleber mit dem Daumen fest an.
Ziehe nun vorsichtig die transparente Folie ab.
Et voilà – dein Aufkleber sitzt perfekt!
Maße jedes Aufklebers:
Candy: 12 cm x 2 cm
Cute: 11,5 cm x 1,5 cm
NjomNjom: 14 cm x 1,5 cm
Sister Cycles: 7cm x 4 cm
Spezialeis: 12cm x 2cm
Spirelli: 8,5cm x 2,3cm
Decal Sticker for your Bike or Laptop or Helmet, whatever you wish.
Instructions for applying the sticker:
Your decals, as they come packaged, are comprised of three layers. The decals themselves are sandwiched by a clear plastic top layer over the decals and a paper backing covering the adhesive on the back side of the decals. The adhesive is quite sticky. Once they’re stuck, they’re stuck, even if they’re stuck in the wrong place.
Lethes stick the decal on our bike:
Clean the spot wish soapy water. Afterwards dry with a towel.
Carefully peel the opaque layer off. Place the decal on the position you desire.
Now press with you thumb over the sticker.
Next peel off carefully the transparent foil. Et voila.
Measurement of every sticker:
Candy: 12 cm x 2 cm
Cute: 11,5 cm x 1,5 cm
NjomNjom: 14 cm x 1,5 cm
Sister Cycles: 7cm x 4 cm
Spezialeis: 12cm x 2cm
Spirelli: 8,5cm x 2,3cm
Aufkleber für dein Fahrrad, Laptop oder Helm – ganz nach Wunsch.
Anleitung zum Aufbringen des Aufklebers:
Dein Aufkleber besteht aus drei Schichten:
Eine durchsichtige Kunststoff-Deckschicht
Der eigentliche Aufkleber
Eine Papierträgerfolie auf der Rückseite, die den Kleber schützt
Der Klebstoff ist sehr stark – einmal angebracht, lässt sich der Aufkleber nicht mehr ohne Weiteres entfernen.
So bringst du den Aufkleber an:
Reinige die gewünschte Stelle mit Seifenwasser und trockne sie anschließend mit einem Handtuch.
Ziehe vorsichtig die undurchsichtige Schicht ab.
Platziere den Aufkleber an der gewünschten Position.
Drücke den Aufkleber mit dem Daumen fest an.
Ziehe nun vorsichtig die transparente Folie ab.
Et voilà – dein Aufkleber sitzt perfekt!
Maße jedes Aufklebers:
Candy: 12 cm x 2 cm
Cute: 11,5 cm x 1,5 cm
NjomNjom: 14 cm x 1,5 cm
Sister Cycles: 7cm x 4 cm
Spezialeis: 12cm x 2cm
Spirelli: 8,5cm x 2,3cm
Decal Sticker for your Bike or Laptop or Helmet, whatever you wish.
Instructions for applying the sticker:
Your decals, as they come packaged, are comprised of three layers. The decals themselves are sandwiched by a clear plastic top layer over the decals and a paper backing covering the adhesive on the back side of the decals. The adhesive is quite sticky. Once they’re stuck, they’re stuck, even if they’re stuck in the wrong place.
Lethes stick the decal on our bike:
Clean the spot wish soapy water. Afterwards dry with a towel.
Carefully peel the opaque layer off. Place the decal on the position you desire.
Now press with you thumb over the sticker.
Next peel off carefully the transparent foil. Et voila.
Measurement of every sticker:
Candy: 12 cm x 2 cm
Cute: 11,5 cm x 1,5 cm
NjomNjom: 14 cm x 1,5 cm
Sister Cycles: 7cm x 4 cm
Spezialeis: 12cm x 2cm
Spirelli: 8,5cm x 2,3cm
Aufkleber für dein Fahrrad, Laptop oder Helm – ganz nach Wunsch.
Anleitung zum Aufbringen des Aufklebers:
Dein Aufkleber besteht aus drei Schichten:
Eine durchsichtige Kunststoff-Deckschicht
Der eigentliche Aufkleber
Eine Papierträgerfolie auf der Rückseite, die den Kleber schützt
Der Klebstoff ist sehr stark – einmal angebracht, lässt sich der Aufkleber nicht mehr ohne Weiteres entfernen.
So bringst du den Aufkleber an:
Reinige die gewünschte Stelle mit Seifenwasser und trockne sie anschließend mit einem Handtuch.
Ziehe vorsichtig die undurchsichtige Schicht ab.
Platziere den Aufkleber an der gewünschten Position.
Drücke den Aufkleber mit dem Daumen fest an.
Ziehe nun vorsichtig die transparente Folie ab.
Et voilà – dein Aufkleber sitzt perfekt!
Maße jedes Aufklebers:
Candy: 12 cm x 2 cm
Cute: 11,5 cm x 1,5 cm
NjomNjom: 14 cm x 1,5 cm
Sister Cycles: 7cm x 4 cm
Spezialeis: 12cm x 2cm
Spirelli: 8,5cm x 2,3cm
Decal Sticker for your Bike or Laptop or Helmet, whatever you wish.
Instructions for applying the sticker:
Your decals, as they come packaged, are comprised of three layers. The decals themselves are sandwiched by a clear plastic top layer over the decals and a paper backing covering the adhesive on the back side of the decals. The adhesive is quite sticky. Once they’re stuck, they’re stuck, even if they’re stuck in the wrong place.
Lethes stick the decal on our bike:
Clean the spot wish soapy water. Afterwards dry with a towel.
Carefully peel the opaque layer off. Place the decal on the position you desire.
Now press with you thumb over the sticker.
Next peel off carefully the transparent foil. Et voila.
Measurement of every sticker:
Candy: 12 cm x 2 cm
Cute: 11,5 cm x 1,5 cm
NjomNjom: 14 cm x 1,5 cm
Sister Cycles: 7cm x 4 cm
Spezialeis: 12cm x 2cm
Spirelli: 8,5cm x 2,3cm